Two Piece Design Ball Valve – Amar Valves Industries

2 Piece Design Ball Valve

AMAR VALVE INDUSTRIES is one of the leading Manufacturing High Quality Industrial Valves company in India with Brand Name of GUJCON, BAJPAI & VICTOR..

Custom Valve Solutions provides complete field services at your facility including preventative maintenance, turnaround services, and emergency call-outs.

Two Piece Ball Valve

Two-piece ball valves are some of the most common ball valves used. As the name suggests, the two piece ball valve consists of two pieces, one piece that has one end connection and the body. The second piece fits into the first, holds the trim in place and includes the second end connection.

The two piece ball valve has one body joint which means the body is composed of two pieces, hence the name “two piece”. This 2 piece body allows a larger ball to be installed at the time of manufacture, which makes this a full bore or full port ball valve.Full bore means that the bore hole in the ball has the same inside diameter as that of the piping it is connected to. The advantage is that there is no pressure drop and flow rate is unaffected.They provide a simple on/off flow, as well as the ability to control flow rate by opening and closing to different degrees, this process is called throttling. Quick and easy to install, threaded valves are easy to use and require no tools for installation.

Technical Specifications

All our products are created from top quality materials and built to last. The 2 piece SS ball valve that we offer is made from high grade stainless steel. This means that it can withstand high (and relatively low) temperatures without ill effects, as well as remain resistant to Rust, contamination and corrosion. A further advantage is that a 2 stainless steel ball valve is relatively inert, meaning it's unlikely to react badly if it comes into contact with mild chemicals, acids or other hazardous substances.

Features
Technical Data
Storage
Applications

> Full Port Ball Valve, maximum ID also called Full Bore

> Lockable Handle Lever with Blow Out Proof Stem

> Pressure Rating up to 1000 PSI Suitable for Most Standard Uses

> PTFE Seal and Seat Good for Chemical and High Heat Applications

> Sizes Start from 1/2″ up to 4″

BODY	ASTM A 351 Gr CF8 \| CF8M \| CF3 \| CF3M
BALL	ASTM A 351 Gr CF8 \| CF8M \| CF3 \| CF3M
STEM	AISI 304
SEAT & SEALS	PTFE
MFG STD	GENERALLY CONFORMING TO BS 5351 \| ISO 17292
TEST STD	BS 6755
ENDS	FLANGED TO ASME B 16.5 (150#/300#)
HYD-TEST PRESSURE	BODY : 1100 Psig (77 Kg/Cm ²) (150#)
PNEUMATIC TEST PRESSURE :	SEAT : 100 Psig (7 Kg/Cm ²)
SIZE RANGE	15 MM TO 100 MM

1. Note: this manual only covers the operation of manually operated valves. For operation of automated valves,
consult the manufacturer’s manual for the actuator.
2. Open and close the valve by turning the handle one-quarter turn (90º).
3. Valve is in the open position when the handle is parallel with the pipeline.
4. Valve is in the closed position when the handle is perpendicular to the pipeline.

Oil & Gas Industries	Dairy Plants	Power Industries
Water Treatment Plants	Agricultural Industries	Cement Industries
Chemical Plants	Food & Beverages Industries	Other Applications